|
|
|
| Door Springs |
|
| During production, each spring
is coated with a generous amount of grease that penetrates the innermost
pores of the spring with additives, displacing the moisture and
preventing the formation of rust and corrosion. In addition, this
process relieves the friction created between spring coils thereby
providing smoother door operation. Finally, the spring and axle
assembly is enclosed in a tube to protect them from the elements
encountered throughout the life of the door. |
|
| |
Package
Protection and Shipping |
 |
Doors
stacked on top of each other in transit are going to shift...
unless they can be packaged in a way to minimise the sliding that
occurs during that time. Gliderol has found the way. We suspend
each door individually in the crates. Whether they travel down
the block or across the country, compaction damages, door abrasion
and chatter marks are virtually eliminated. |
| Rachet Tensioning Device |
|
| Our ratchet tensioning device
supplied as standard equipment on our door offers a simpler method
of tensioning while more accurately fine tuning all the springs
on the door at the same time. There is no extra hardware required.
Eight different positions on the tension wheel allow one to perfectly
balance the door every time. There are no pins required to hold
the tension on the spring. You simply just click it. |
|
| |
Radial
Ball Bearings |
 |
Gliderol
supplies radial ball bearings at no additional cost. Our permanently
lubricated bearings require no maintenance and are guaranteed
to last the entire life span of the door. |
| Dead Axle and Torque Tube Assembly |
|
| The tube housing protects
the springs and strengthens the axle. Eliminating axle push and
shift that can occur with a live axle, the dead axle design allows
for a straighter travel path of the door curtain in the guides.
The biggest feature of this design is that it affords the fine turning
or any spring adjustment to equally affect all springs on the door
at the same time. |
|
| |
Door Stops |
 |
Our removable
door stops are simple to install and prevent the curtain from
over travelling the guide when raising the door. |
| Magnetic Stainless Steel Latch |
|
| Our new patented mini-latch
features a cover plate made from a heavy gauge of stainless steel.
In addition, the latch cover protects the slide from tampering by
completely covering the slide with the exception of a tab used to
operate the latch. To further secure the door, the latch’s
five centimetres (two inches) throw with its magnetic properties
can be incorporated with the new guide mounted security devices.
This versatile design affords the ability for you to utilise padlocks,
cylinder locks or both. |
|
|
